Polyart Standard range

Weights available in rolls and sheets.

Property Units Polyart Range
Basis Weight g/m²
lbs 500x25"x38"		 75
51		 90
61		 110
75		 140
95		 170
115		 200
135		 240
162		 285
193
Thickness mil
microns		 3.8
95		 4.5
110		 5.5
140		 7.0
175		 8.5
215		 10
250		 12
300		 13.5
350

Standard sheet and roll sizes are stocked at fine paper distributors throughout the world.
Also, special sheet and roll sizes are available with a standard minimum at 1,000 lbs. / 455 kg.

For more information, please ask your local Polyart distributor or Contact Us.

Technical Data Sheet – click here

Property Method Units  Polyart
Basis Weight ASTM
D646-92		 g/m² 75 90 110 140 170 200 240 285
lbs 500x25”x38” 51 61 75 95 115 135 162 193
Thickness ASTM
D645-92		 mil 3.8 4.5 5.5 7.0 8.5 10 12 13.5
microns 95 110 140 175 215 250 300 350
Brightness ASTM
D985		 % 90 90 90 90 90 90 90 90
Opacity ASTM
D589		 % 92 94 95 97 98 98 98 98
Tensile Strength ISO N/mm² MD 45 45 43 40 38 34 34 32
527-3 TD 35 35 35 32 30 28 28 25
ASTM
D638		 lbs/in² MD 6520 6200 6230 5790 5500 4920 4930 4200
TD 5070 5200 5070 4630 4340 4050 3770 3200
Initial Tear Strength ASTM
D1004-66		 N/mm MD 84 82 80 82 84 83 85 75
TD 109 106 105 107 108 100 110 95
lbs MD 2.05 2.29 2.51 3.28 4.08 4.29 5.64 5.79
TD 2.17 2.92 3.30 4.28 5.24 5.72 6.84 7.33
lbs/in MD 540 510 457 457 480 429 470 429
TD 570 650 600 612 617 572 570 543
Rigidity (Kodak) ISO 5629   mN.m 0.15 0.27 0.43 0.85 1.30 2.10 4.00 5.7
Stiffness (Gurley) TAPPI
T-543		 mg 48 76 124 225 362 540 1060 1400

Advice in this page is based on practical field experience and given in good faith but Arjobex may not be held liable for loss or damage arising from action based on this information.

For more information, please contact us.

Polyart - standard
Polyart - range

Read more..